Fantek T105D Top Load Truss Lifting Tower
The tower T105D is ready to lift a load of 225 kg at a height of 5,3 meters. It is composed of four extensible steel profiles, lifted by high-strength steel cable with ribbed driven pulleys with SELOIL bearings.
Fixing sections of the tower to the height desired is by automatic locking steel pin.
Legs with non-slip rubber feet.
The lifting tower is operated by a crank winch which features Fantek’s Wire Drive grooved pulley system as standard, which reduces the angle of the wire line to the winch drum allowing it to meet DIN 56950 standards which state the angle should never be over 4 degrees, as if it’s higher the wire lifetime could be extremely reduced.
Available in Standard specification or with the latest DynSys 1.2 safety device that ensures that the force on the handle never exceeds 15 kn and stops the elevation in the case of overloading of the unit (more than 20% of the maximum working load).
- Maximum Height – 5,20 m
- Folded Height – 1,75m
- Maximum Load – 225 kg
- Minimum Load – 25 kg
- Unfolded Base – 1,55 x 1,55 m
- Folded Base – 0,46 x 0,46 m
- Weight – 84,5 kg
- Winch – 900 kg
- Truss Adaptor – ATC25S, ATCMOS, ATCLTS