Studiomaster V6 Large Active Line Array Speaker System with 2x18" Subs
(
SSF4400 )
Key Features
- Complete line array speaker solution for large venues and outdoor events
- Integrated DSP management for full system configuration and control
- Configurable flying or ground stack design for installation flexibility
- Immense bass reinforcement via dedicated double 18-inch subwoofers
- Modular setup ensures precise audio coverage and consistent SPL output
Concert Audio Power: Studiomaster V6 Line Array Speaker System
The Studiomaster V6 Large line array speaker system brings an integrated approach to professional sound reinforcement, designed specifically for concerts, festivals, and demanding live events. Engineered as a single, cohesive line array system, it combines advanced active modules with deep sub-bass support, delivering dynamic and detailed audio that suits large indoor arenas or open-air performances alike.
Key Features and Benefits
This versatile concert PA system functions as a true plug-and-play audio solution. Sixteen V6A active array elements form the backbone, each fitted with a 550W bi-amplifier configuration. By assigning 400W to dual 6.5” midrange drivers and 150W to a 3” high-frequency driver, every module achieves up to 130dB SPL while maintaining excellent clarity.
Combined, these modules provide a controlled 100-degree (horizontal) by 10-degree (vertical) coverage, so audiences experience consistent sound distribution whether in a packed marquee or a sprawling outdoor field.
Midbass to low frequencies in the array are handled by four flown 15-inch active subwoofers, working down to 40Hz and managing up to 130dB SPL per unit.
Four ground-stacked double 18-inch passive subs, each matched with dedicated PDA-B2500 amplifiers, and fed via an Amate DSP management unit, offer immense bass that fills even the largest spaces.
This modular approach lets the festival PA system adapt easily to different venues and requirements, from flying array setups using the supplied steel flybars to ground-stacked bass arrays.
Onboard DSP processing allows for granular adjustment of crossover, EQ, limiting, and delay, either via rear panel encoders or remotely with RS485 connectivity. This ensures precise alignment and system protection, giving technicians quick command of every array and subwoofer in the rig.
Applications
The Studiomaster V6 system is tailored for large-format live sound. It excels at outdoor festivals, medium to large-scale concert venues, touring rigs, and sports events demanding consistent output across broad areas. Rental and production companies benefit from the transportable, modular design, while event organisers can upgrade their guest experience with comprehensive audio coverage and deep, clean bass. Whether flying above a stage for theatrical applications or ground-stacked for portable use, this line array system delivers reliable results night after night.
Package Includes
- 16 x Studiomaster V6A 2x6.5" Active Line Array Modules
- 4 x Studiomaster V6SA 15" Active Subwoofers
- 4 x Studiomaster V218S 2x18" Passive Subwoofers (total: 8x 18" sub drivers)
- 4 x Power Dynamics PDA-B2500 Power Amplifiers
- 1 x Amate Audio LMS206 DSP Management System
- 2 x Studiomaster V6 Top Rack Suspension Flybars
Summary
As a fully-integratedfestival line array speaker solution, the Studiomaster V6 system merges sophisticated DSP, heavy-duty amplifiers, and flexible rigging options. Every element, from polypropylene-enclosed array modules to resin-coated ply sub enclosures, reflects purposeful engineering for pro audio deployment. The complete package is built for easy transport, rapid set-up, and total sound control, making it a trusted choice for hire companies and audio professionals who require consistent results across a broad range of live concert and festival system applications.
- 2 x 6.5-inch MF drivers with 38mm voice coils
- 1 x 3-inch voice coil neodymium HF array drivers
- Reinforced composite PP enclosure
- Built-in 550W power amplifer and DSP for total control
- High performace 130dB SPL
- 100 x 10 degree coverage angle
- High performance 1 x 15-inch LF driver with 4“ / 100mm voice coil
- High performance 130dB SPL
- Convenient scoop handles
- Adjustable suspension system available
- Fly bar rack for V6 line array
- Black powder coat finish
- Heavy duty loop fixings for hanging
- Passive line array subwoofer
- 2x 18-inch woofers with 4-inch voice coils
- 2000W RMS - 138dB
- Waterproof resin finished birch plywood
- Designed for ground/stage use
- 2 Ohm reliable
- Blue LCD display for temperature, operating mode, power, protection and audio level
- Signal, overload and bridge LED indicator on each channel
- Automatic clip limiting and Ground lift function
- Soft-start function
- Innovative heatsink with temperature-controlled fans
- Adjustable crossover network: 45-960 Hz / 450-9600 Hz
- Switchable high-pass and low-pass filter
- Suitable for 19" rack mounting (2U)
- Protected against short circuits, overload and heat
- Stereo, parallel and bridge mode
- High power output and excellent sound quality
- Inputs: 2 (XLR)
- Outputs: 6 (XLR)
- Input Level (Nominal / Max): 0 dBu / +23 dBu
- Input Dynamic Range: 110 dB
- Output Level (Nominal / Max): 0 dBu / +12 dBu
- Fequency Response: 20 Hz – 20 kHz (+/– 0.5 dB)
- A/D Converters: 24–bit, 48 kHz
- Latency: < 1.32 ms
- Connectivity: USB
- Mains: Universal switch mode Power Supply 90-264 V / 45-65 Hz
- Max SPL: 130dB
- AMP POWER: MF 400W / HF 150W
- Weight: 15kg
- Cabinet type: 2-way active line array
- Frequency response: 70Hz - 20kHz (-10dB)
- Coverage (h x v): 100 x 10 degree
- Sensitivity (1wat1m): 0dBu
- Impedance: -
- LF Driver: -
- MF Driver: 2 x 6.5-inch / 38mm VC
- HF Driver: 1 x 3-inch / 74mm VC
- DSP: gain, eq, crossover, delay, threshold
- Crossover frequency: DSP controlled
- Vertical spread angle: 0-10 degree (1 degree step)
- Dimensions (wxhxd): 470x 207 x 341mm
- MPN: V6A
- Max SPL: 130dB
- AMP POWER: 1200W
- Weight: 41kg
- Cabinet type: active line array woofer
- Frequency response: 40Hz - 150Hz (-10dB)
- Coverage (h x v): -
- Sensitivity (1wat1m): 0dBu
- Impedance: -
- LF Driver: 1 x 15-inch / 100mm VC
- MF Driver: -
- HF Driver: -
- DSP: gain, eq, crossover, delay, threshold
- Crossover frequency: DSP controlled
- Vertical spread angle: -
- Dimensions (wxhxd): 474 x 506 x 673mm
- MPN: V6SA
- Box section steel construction
- Required for suspending an array system
- MPN: V6TOP-RACK
- Max SPL: 138dB
- PEAK: 8000W
- PGM: 4000W
- RMS: 2000W
- Cabinet type: passive line array sub woofer
- Frequency response: 32Hz - 200Hz
- Sensitivity 1wat1m: 99dB +/-3dB
- LF Driver: 2 x 18-inch / 4-inch VC
- Impedance: 4 ohm li>Crossover frequency: 100Hz
- Dimensions (wxhxd): 1115 x 595 x 758mm
- MPN: V218
- Output channels: 2
- Output power: RMS @ 2 Ohm per channel: 1700W
- Output power: RMS @ 4 Ohm per channel: 1200W
- Output power: RMS @ 8 Ohm per channel: 800W
- Output power: RMS @ 4 Ohm bridged: 3200W
- Output power: RMS @ 8 Ohm bridged: 2400W
- Speaker connections: 6.3mm jack, Speaker screw terminal
- Input connections: 6.3mm Jack, XLR (3-pin)
- Output connections: NL-4
- Frequency response : 10Hz - 20.000Hz
- Crosstalk: >105dB
- Signal-to-noise ratio: >95dB
- Damping Factor: >500
- Slew rate: 60V/uS
- Input sensitivity line: 775mV - 1.2V
- Input impedance: 20 kOhm
- Power supply: 220-240VAC 50Hz
- Dimensions (L x W x H): 482 x 470 x 88mm (19" x2U)
- Is the item 19"?: Yes
- Weight: 22.0000
- Dimensions (HxWxD): 1U 19" Rack, 44 x 483 x 165 mm
- Weight: 2.3 kg
- MPN: LMS206