A powerful compact active line array speaker system from Studiomaster, this complete flyable line array package is a superb choice for a concert PA system or small festival PA system, offering an all-active, plug-and-play design with a 15-inch subwoofer and three array modules to each side of its flown stacks.
Each of the six V6A speaker modules in this concert PA system features an efficient 550W bi-amplifier, sending 400W to their dual 6.5-inch midrange woofers, and 150W to the 3-inch high-frequency drivers. The custom woofers are designed with a 38mm voice coil, with a 74mm unit with neodymium magnet for the HF driver, which combine to produce an enormous 130dB SPL per module.
Designed for superb bass response and controlled output, the V6SA low-frequency enclosures are fitted with 1200W Class D amplifiers, driving a custom 15-inch subwoofer speaker with 100mm voice coil that allows for a 40Hz low end and 130dB SPL. Designed for easy flying using the included V6 Top Rack fixture, the V6SA supports the attached line array speaker modules and allows for a 0-10-degree spread angle adjustment to each unit for the optimum audio projection.
The built-in DSP on every V6 speaker gives you full control of each line array module, and over your full system, with adjustments for crossover points, EQ, limiters, and a time delay. The DSP is also linked to the amplifier’s thermal shutdown protection. This intuitive signal processing is easily controlled using the display and encoder on the speakers rear panels, or you have the convenient option to connect your laptop through the RS485 connection to give you remote system adjustment.
Designed with ease of installation in mind, these active line array speaker units feature in and out connections for their audio, DSP system and for mains power, allowing a full stack to only require single cable feeds. The V6A modules are made from a hard-wearing composite material, with the V6SA subs being resin-coated ply construction. This portable festival PA system is easy to transport and set up when used in a touring situation. Their onboard amplification and signal processing also means the V6 active line array system is completely self-contained, requiring only a mains input and source signal, so it is as simple as can be to operate.
Package Includes
- 6x Studiomaster V6A 6″ Active MF/HF
- 2x Studiomaster V6SA 15″ Active LF
- 2x Studiomaster V6 Top Rack Flybar
Key Details
- Six V6A array speakers with 2 x 6.5-inch midrange drivers and a 3-inch high-frequency array driver
- V6A array tops are built with a composite polypropylene enclosure for lightweight and durability
- V6SA subs are ply construction with a tough resin finish
- V6A modules each feature a 550W power bi-amplifier and DSP system
- V6SA subs feature a 1200W Class D amplifier with DSP
- High performance 130dB SPL output per module for immense performance
- 100 x 10 degree adjustable coverage angle ideal for different venue sizes and events
- Input/output connections for looping of mains power and remote system DSP control
- Flybars included for suspension from suitable rigging or ceiling fixture points
Features
- V6A Array Speaker
- 2 x 6.5-inch midrange drivers with 38mm voice coils
- 1 x 3-inch voice coil neodymium high frequency array driver
- Reinforced composite polypropylene enclosure for lightweight and durability
- Built-in 550W power bi-amplifier and DSP for total system control
- High performance 130dB SPL output per module for immense performance
- 100 x 10 degree coverage angle ideal for a wide range of venues and events
- Built-in rigging system
- Input/output connections for looping of mains power and DSP control
- V6SA Subwoofer
- 1 x 15-inch low-frequency subwoofer driver with 4-inch voice coil
- High-power linear amplifier with intelligent thermal protection
- DSP audio processing for gain, EQ, crossover, delay and threshold adjustment
- Side-mounted carry handles
- Built-in array fixing points for easy attachment of V6A modules
- Can be flown (suspended) or ground-stacked
Specifications
- V6A Array Speaker
- Type – 2-way active line array
- Frequency response – 70Hz – 20kHz
- MF driver – 2 x 6.5-inch / 38mm VC
- HF driver – 1 x 3-inch / 74mm VC
- DSP – gain, eq, crossover, delay, threshold
- Crossover frequency – DSP controlled
- Vertical spread angle – 0-10 degrees (1 degree steps)
- SPL – 130dB
- Dimensions (wxhxd) – 470 x 207 x 341mm
- V6SA Subwoofer
- Type – active line array woofer
- Frequency response – 40Hz – 150Hz
- LF driver – 1 x 15-inch / 100mm VC
- DSP – gain, eq, crossover, delay, threshold
- Crossover frequency – DSP controlled
- SPL – 130dB
- Dimensions (wxhxd) – 474 x 506 x 673mm
