Studiomaster V10 high performance passive line array package thats supplied here for ground stack placement on floors or stages. With high SPL and low distortion from its custom drivers and precision birch ply enclosures with waterproof finish, this V10 line array system is ideal as a concert PA system or festival PA system.
The six V10 line array speaker modules each feature a two-way linear sound dispersion design to provide a clear rich audio output. Dual 10-inch neodymium drivers produce high performance with a wide dynamic range, and are complemented by a titanium and neodymium HF compression driver for highly detailed top-end. Each V10 array speaker is adjustable in-stack from 0-10 degrees for the optimal spread angle.
The low end of this festival PA system is a pair of the V10S subwoofers, which will each form the bottom section of an array stack, supporting three V10 top modules. With 2x 15-inch woofer with 4-inch voice coils and a vented horn baffle arrangement, the V10S subs are capable of an impressive 139dB and 35Hz bottom end, with an ultra-efficient 101dB sensitivity for easy amplifier pairing and fast dynamics.
For ultimate reliability, and the latest technology in power management and protection, we have matched this V10 concert PA system with high-performance Amate Audio amplifiers. An HD1200 unit specifically to run the arrays compression horn tweeters, and a pair of the monster HD3200 to run the 10-inch array drivers and the dual 15-inch subwoofer enclosures. These amplifiers are immensely powerful, with full thermal and overcurrent protection, along with threshold limiter settings for the master output.
An Amate LMS-206 loudspeaker management processor is on hand to take care of the system’s signal feed. Its powerful 64-bit DSP allows for complete crossover assignment with 10 parametric EQs, signal delay lines up to 2 seconds, compressor limiter, 80 preset storage, and USB or Ethernet connections for laptop setup. These units work in tandem with the Amate amplifiers to monitor and control all signal levels and control any clipping.
This complete V10 line array system offers incredible power handling and sound quality, and will provide an immense level of audio performance that makes it an ideal choice for live events such as festivals and stage shows, or as an indoor church sound system for larger venues that require the sound projection that a standard PA simply can’t provide.
Package Includes
- 6x Studiomaster V10 Passive Array Speaker
- 2x Studiomaster V10S Passive Subwoofer
- 1x Amate Audio HD1200 Amplifier
- 2x Amate Audio HD3200 Amplifier
- 1x Amate Audio LMS206 DSP Crossover Unit
Key Details
- Complete ground stack line array system for installation or mobile use
- Six V10 passive array speakers with 2 x 10-inch midrange drivers and 2x 1.75-inch high frequency compression drivers
- Two V10S passive 2x 15-inch subwoofer enclosures
- Amate Audio LMS206 DSP speaker management crossover system
- One Amate Audio HD-1200 power amplifier to run the HF compression horns
- Two Amate Audio HD-3200 power amplifiers to run the arrays 10-inch woofers and the subwoofer units
- 120 x 10 degree adjustable coverage angle ideal for different venue sizes
Features
- V10 passive line array speaker module
- Superior quality dual neodymium 10-inch low/mid woofers
- 1.75-inch high power compression driver with 44mm voice coil
- Built-in adjustable rigging mounts with angle adjustment
- Protected NL4 input and looped output connections
- 18mm birch plywood construction
- 120 x 10-degree coverage
- Waterproof black textured resin finish
- V10S passive line array subwoofer module
- High excursion 15-inch woofers with 4-inch voice coils
- Vented horn dual baffle cabinet design
- Built-in adjustable rigging mounts with angle adjustment
- Protected NL4 input and looped output connections
- 18mm birch plywood construction
- Waterproof black textured resin finish
Specifications
- V10 passive line array speaker module
- Low-frequency 700W RMS
- High-Frequency 80W RMS
- Max SPL of 137dB
- Frequency response – 70Hz – 20kHz
- Dimensions (wxhxd) – 810 x 290 x 490mm
- V10S passive line array subwoofer module
- Peak 5600W
- RMS 1400W
- Frequency response – 35Hz – 500Hz
- Dimensions (wxhxd) – 810 x 560 x 820mm
- Max SPL of 139dB
