Complete Studiomaster V10 high-performance passive line array package thats supplied here with suspension racks to allow a flown array installation. With high SPL capability and ultra-low distortion from its custom drivers and heavy-duty waterproofed birch ply enclosures, this V10 line array system is ideal as a concert PA system or festival PA system.
Each of the six V10 line array speaker modules features a two-way linear dispersion design to produce a rich audio output. A pair of 10-inch neodymium drivers produce a wide dynamic range, and are coupled with a titanium and neodymium HF compression driver set for a clear and detailed top-end. Each V10 array speaker module is adjustable in-stack from 0-10 degrees for the optimal spread angle.
Perfect as a concert PA system the top array speakers are backed up with a pair of V10S flyable subwoofers, which will each form the top section of a flown array stack, supporting three V10 modules underneath per side. With dual 15-inch woofers with 4-inch voice coils and a vented horn baffle arrangement, the V10S subwoofers are capable of a mighty 139dB and 35Hz low-end, with an ultra-efficient 101dB sensitivity for easy amplifier pairing and fast dynamics.
For the latest technology and reliability in power and protection, we have specced this V10 festival PA system with high-performance Amate Audio amplifiers. An HD1200 unit just for the arrays compression horn tweeters, and a pair of the hugely powerful HD3200 to run the 10-inch array drivers and the dual 15-inch subwoofer enclosures. Amate amplifiers are heavily over-engineered, with full thermal and overcurrent protection, and threshold limiter settings for the master output.
Also from Amate, the LMS-206 loudspeaker management processor is on hand to distribute the system’s signal feed. Its powerful 64-bit DSP provides complete crossover assignment with 10 parametric EQs, signal delay lines up to 2 seconds, compressor limiter, 80 preset storage, and USB or Ethernet connections for easy laptop setup. These DSP units work in tandem with the Amate amplifiers to monitor and control all signal levels and control any clipping.
This complete V10 line array system offers immense power handling and sound quality, and will provide a level of audio performance that makes it an ideal choice for live events such as festivals and stage shows, or as an indoor church sound system for larger venues. The suspension system allows fo easy flying of the system from suitable trussing towers or structural ceiling points.
Package Includes
- 6x Studiomaster V10 Passive Array Speaker
- 2x Studiomaster V10S Passive Subwoofer
- 1x Amate Audio HD1200 Amplifier
- 2x Amate Audio HD3200 Amplifier
- 1x Amate Audio LMS206 DSP Crossover Unit
- 2x Studiomaster Top Rack Flybar
Key Details
- Complete flyable line array system for installation or mobile use
- Six V10 passive array speakers with 2 x 10-inch midrange drivers and 2x 1.75-inch high-frequency compression drivers
- Two V10S passive 2x 15-inch subwoofer enclosures
- Amate Audio LMS206 DSP speaker management crossover system
- One Amate Audio HD-1200 power amplifier to run the HF compression horns
- Two Amate Audio HD-3200 power amplifiers to run the arrays 10-inch woofers and the subwoofer units
- 120 x 10 degree adjustable coverage angle ideal for different venue sizes
Features
- V10 passive line array speaker module
- Superior quality dual neodymium 10-inch low/mid woofers
- 1.75-inch high power compression driver with 44mm voice coil
- Built-in adjustable rigging mounts with angle adjustment
- Protected NL4 input and looped output connections
- 18mm birch plywood construction
- 120 x 10-degree coverage
- Waterproof black textured resin finish
- V10S passive line array subwoofer module
- High excursion 15-inch woofers with 4-inch voice coils
- Vented horn dual baffle cabinet design
- Built-in adjustable rigging mounts with angle adjustment
- Protected NL4 input and looped output connections
- 18mm birch plywood construction
- Waterproof black textured resin finish
Specifications
- V10 passive line array speaker module
- Low-frequency 700W RMS
- High-Frequency 80W RMS
- Max SPL of 137dB
- Frequency response – 70Hz – 20kHz
- Dimensions (wxhxd) – 810 x 290 x 490mm
- V10S passive line array subwoofer module
- Peak 5600W
- RMS 1400W
- Frequency response – 35Hz – 500Hz
- Dimensions (wxhxd) – 810 x 560 x 820mm
- Max SPL of 139dB
| Brand | Studiomaster |
|---|---|
| Speaker Type | Passive (Non-Powered) |
| Line Array Type | Full Systems |
Related products
