High-performance passive line array package from Studiomaster and Amate Audio, supplied here for ground stack placement on floors or stages. Offering high SPL capability and ultra-low distortion from its custom speaker drivers and precision birch ply enclosures with a waterproof finish, this large V10 line array system is ideal as a concert PA system or festival PA system.
Each of the two array ground stacks has three V10 line array speaker modules which feature a two-way linear sound dispersion design. Fitted with a pair of 10-inch neodymium drivers for high performance with a wide dynamic range, which are complemented by a neodymium and titanium HF compression driver for a highly detailed top-end. Each V10 array speaker is adjustable in-stack from 0-10 degrees for the optimal projection angle.
This festival PA system provides huge low-end reinforcement, starting with a pair of the V10S subwoofers, which will each form the base section of each array stack, supporting three V10 top modules. With dual 15-inch woofers with a vented horn baffle arrangement, the V10S subs are capable of an impressive 139dB and 35Hz bottom end, with an ultra-efficient 101dB sensitivity for easy amplifier pairing and fast dynamics.
In addition, this larger concert PA system comes with a pair of Studiomaster V218S double 18-inch subwoofers, with 8000W Peak/2000W RMS and 138dB SPL down to 32Hz. The custom driver’s 4-inch voice coils allow these beasts to really get things moving, especially with their own Amate HD3200 power amplifier delivering all the push they need.
For the very best reliability and advanced power management and protection, we have provided this V10 line array system with high-performance Amate Audio amplifiers. An HD1200 specifically to run the array’s compression horn drivers, and a pair of the monster HD3200 to run the 10-inch array drivers and the V10S low-frequency enclosures. Amate amplifiers are immensely powerful, with full thermal and overcurrent protection, along with threshold limiter settings for the master output.
An Amate LMS-206 loudspeaker management processor takes care of the system’s signal feed. Its 64-bit DSP allows for complete crossover assignment with 10 parametric EQs, signal delay lines up to 2 seconds, compressor limiter, 80 preset storage, and USB or Ethernet connections for laptop setup. This unit works alongside the Amate amplifiers to monitor and control all signal levels and control any clipping.
This complete V10 line array system offers incredible power handling and audio quality and will provide an immense level of sound performance that makes it an ideal choice for live events such as festivals and stage shows, or as an indoor church sound system for larger venues that require the sound projection that a standard PA simply can’t provide.
Package Includes
- 6x Studiomaster V10 Passive Array Speaker
- 2x Studiomaster V10S Passive Subwoofer
- 2x Studiomaster V218S Passive Subwoofer
- 1x Amate Audio HD1200 Amplifier
- 3x Amate Audio HD3200 Amplifier
- 1x Amate Audio LMS206 DSP Crossover Unit
Key Details
- Ground stack line array system for installation or mobile use
- Six V10 passive array speakers with 2 x 10-inch midrange drivers and 2x 1.75-inch high-frequency compression drivers
- Two V10S passive 2x 15-inch subwoofer enclosures
- Two V218S passive 2x 18-inch subwoofer enclosures
- Amate Audio LMS206 DSP speaker management crossover system
- One Amate Audio HD-1200 power amplifier to run the HF compression horns
- Three Amate Audio HD-3200 power amplifiers to run the arrays 10-inch woofers and subwoofer units
- 120 x 10 degree adjustable coverage angle ideal for different venue sizes
Features
- V10 passive line array speaker module
- Superior quality dual neodymium 10-inch low/mid woofers
- 1.75-inch high power compression driver with 44mm voice coil
- Built-in adjustable rigging mounts with angle adjustment
- Protected NL4 input and looped output connections
- 18mm birch plywood construction
- 120 x 10-degree coverage
- Waterproof black textured resin finish
- V10S passive line array subwoofer module
- High excursion 15-inch woofers with 4-inch voice coils
- Vented horn dual baffle cabinet design
- Built-in adjustable rigging mounts with angle adjustment
- Protected NL4 input and looped output connections
- 18mm birch plywood construction
- Waterproof black textured resin finish
- V218S Subwoofer
- 2x 18-inch passive subwoofer enclosure
- 32Hz – 200Hz
Specifications
- V10 passive line array speaker module
- Low-frequency 700W RMS
- High-Frequency 80W RMS
- Max SPL of 137dB
- Frequency response – 70Hz – 20kHz
- Dimensions (wxhxd) – 810 x 290 x 490mm
- V10S passive line array subwoofer module
- Peak 5600W
- RMS 1400W
- Frequency response – 35Hz – 500Hz
- Dimensions (wxhxd) – 810 x 560 x 820mm
- Max SPL of 139dB
- V218S Subwoofer
- MAX SPL – 138dB
- PEAK – 8000W
- RMS – 2000W
- Impedance – 4 ohm
- Weight – 83kg
