Studiomaster V6 Active Line Array Speaker System with 2×18″ Subs

Complete ground stack line array speaker system from Studiomaster which is an ideal choice for a compact sized concert PA system or small festival PA system. This lightweight line array system is easy to transport and offers an all-active, plug-and-play array design, along with a pair of 2x 18-inch subwoofer enclosures with separate amplifiers for extra low-end sound reinforcement.

Each of the eight V6A active array speaker modules in this concert PA system is fitted with a 550W bi-amplifier, providing 400W to their dual 6.5-inch midrange woofers, and 150W to the 3-inch high-frequency drivers. The custom designed woofers have a 38mm voice coil, and are joined with a 74mm tweeter driver unit with neodymium magnet, which combine to produce an enormous 130dB SPL per module.

Designed for a controlled and defined bass response, the four V6SA active subwoofers are fitted with 1200W amplifiers driving a custom 15-inch speaker with 100mm voice coil, producing a 40Hz low end and 130dB SPL per unit. Designed for easy ground stacking, the V6SA supports any V6A line array speaker modules and allows for a 0-10-degree spread angle adjustment to each unit for the optimum audio projection.

The DSP built into every V6 active speaker gives you complete control of each line array module and bass module. It provides adjustments for crossover points, EQ, limiters, and a time delay, and is also linked to the amplifier’s thermal protection shutdown. This intuitive digital processing is easily controlled using the display and encoder on the speakers rear panels, or you have the convenient option to connect your laptop through the RS485 connection to give you complete remote system adjustment.

The two V218S double 18-inch subwoofers are passive design, with each being powered by its own dedicated PDA-B2500 amplifier that provides 3200W RMS at 4 ohm, allowing these subs to work to their true potential of a staggering 138dB SPL each. To feed these monsters correctly, an Amate Audio LMS 206 DSP management processor is included for crossover levels settings and signal limiting

Designed for an easy set up, these active line array speaker units feature in and out connections for their audio, DSP system and for mains power, allowing a full array stack to only require single cable feeds. The V6A array modules are built from a hard-wearing composite material, with the V6SA and additional V218S subwoofers being a resin coated ply construction. This portable festival PA system is easy to transport and setup when used in a touring situation.

Package Includes

• 8x Studiomaster V6A 6″ Active MF/HF
• 4x Studiomaster V6SA 15″ Active LF
• 2x Studiomaster V218S 2×18″ Subwoofer
• 2x Power Dynamics PDA-B2500 Amplifier
• 1x Amate Audio LMS206 DSP Management System

Key Details

• Complete line array system for installation or mobile use
• Eight V6A active array speakers with 2 x 6.5-inch midrange drivers and a 3-inch high frequency array driver
• Four V6SA 15-inch active subs with 1200W DSP amplifiers
• Two V218S 2 x 18-inch passive subwoofer enclosures with a pair of PDA-B2500 power amplifiers
• V6A array tops are built with a composite polypropylene enclosure for lightweight and durability
• V6A modules each feature a 550W power bi-amplifier and DSP system
• Amate Audio LMS206 DSP speaker management system for the V218S subs
• 100 x 10 degree adjustable coverage angle ideal for different venue sizes
• Input/output connections for looping of mains power and remote system DSP control

Features

• V6A Array Speaker
• 2 x 6.5-inch midrange drivers with 38mm voice coils
• 1 x 3-inch voice coil neodymium high frequency array driver
• Reinforced composite polypropylene enclosure for lightweight and durability
• Built-in 550W power bi-amplifier and DSP for total system control
• High performance 130dB SPL output per module for immense performance
• 100 x 10 degree coverage angle ideal for a wide range of venues and events
• Built-in rigging system
• Input/output connections for looping of mains power and DSP control
• V6SA Subwoofer
• 1 x 15-inch low-frequency subwoofer driver with 4-inch voice coil
• High power linear amplifier with intelligent thermal protection
• DSP audio processing for gain, EQ, crossover, delay and threshold adjustment
• Side mounted carry handles
• Built-in array fixing points for easy attachment of V6A modules
• Can be flown (suspended) or ground stacked
• V218S Subwoofer
• 2x 18-inch passive subwoofer enclosure
• 32Hz – 200Hz
• 4-inch voice coils

Specifications

• V6A Array Speaker
• Type – 2-way active line array
• Frequency response – 70Hz – 20kHz
• MF driver – 2 x 6.5-inch / 38mm VC
• HF driver – 1 x 3-inch / 74mm VC
• DSP – gain, eq, crossover, delay, threshold
• Crossover frequency – DSP controlled
• Vertical spread angle – 0-10 degree (1 degree steps)
• SPL – 130dB
• Dimensions (wxhxd) – 470 x 207 x 341mm
• V6SA Subwoofer
• Type – active line array woofer
• Frequency response – 40Hz – 150Hz
• LF driver – 1 x 15-inch / 100mm VC
• DSP – gain, eq, crossover, delay, threshold
• Crossover frequency – DSP controlled
• SPL – 130dB
• Dimensions (wxhxd) – 474 x 506 x 673mm
• V218S Subwoofer
• MAX SPL – 138dB
• PEAK – 8000W
• RMS – 2000W
• Impedance – 4 ohm
• Weight – 83kg
• Dimensions – (wxhxd) – 1115 x 595 x 758mm